Shure Beta 87A Vocal Microphone

$249.00
Article number: BETA 87A
Availability: Ships from manufacturer
Delivery time: Normal delivery time is 2-7 business days, subject to availability.

The Shure BETA®87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Beta 87A combines superb performance with the ruggedness needed for touring and field production.

The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the “boomy” sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight supercardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.

Features

  • Smooth frequency response with gradual presence rise
  • Highly consistent supercardioid polar pattern provides superior gain-before-feedback
  • Electronic low-frequency roll-off compensates for proximity effect
  • Wide dynamic range (117 dB) and low distortion characteristics
  • Very low susceptibility to RFI and electromagnetic hum
  • Advanced cartridge shock-mount system absorbs mechanical shocks and reduces handling noise
  • Built-in pop filter reduces undesirable wind and breath sounds
  • Legendary Shure quality and reliability

Specifications

  • Cartridge Type: Electret Condenser
  • Frequency Response: 50 to 20,000 Hz
  • Polar Pattern: Supercardioid
  • Output Impedance: 150 ohms
  • Sensitivity (at 1kHz, open circuit voltage): −52.5 dBV/Pa (2 mV)
  • Maximum SPL (1 kHz at 1% THD, 1k ohmsload): 140.5 dB
  • Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz) :70.5 dB
  • Dynamic Range (at 1 kHz, 1 k ohmsload): 117 dB
  • Clipping Level (1 kHz at 0.25% THD, 1k ohms load): −6 dBV (0.5 V)
  • Self Noise (typical, equivalent SPL, A-weighted): 23.5 dB typical
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
  • Weight Net: 0.207 kg (0.475 lbs)
  • Connector: Three-pin professional audio (XLR), male
  • Power Requirements: 11 to 52 Vdc phantom (1.2 mA)
0 stars based on 0 reviews