Shure Beta 98H/C Clip-On Instrument Microphone

$209.00
Article number: BETA 98H/C
Availability: Ships from manufacturer
Delivery time: Normal delivery time is 2-7 business days, subject to availability.

A versatile solution for brass or percussion instruments. No external mounting hardware required.

The BETA®98H/C and the wireless version WB98H/C are premium cardioid condenser instrument microphones that clamp onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

Features

  • Premier live performance microphone with Shure quality, ruggedness, and reliability
  • Uniform supercardioid pick-up pattern for maximum gain before feedback and superior rejection of off-axis sound
  • Smooth, wide frequency response with gradual presence rise and controlled proximity effect tailored for vocals
  • Advanced cartridge shock mount system absorbs mechanical shock and minimizes handling noise
  • Dent-resistant steel mesh grille and enamel coated metal alloy construction resist wear and abuse
  • Effective built-in pop filter reduces undesirable wind and breath noise
  • Very low susceptibility to RF and electromagnetic hum
  • Interchangeable replacement cartridges are available as - RPM108: Cardioid, RPM110: Supercardioid
  • Includes integrated clip-on horn mount, Windscreen, RPM626 in-line preamplifier and 25’ cable

Specifications

  • Cartridge Type: Electret Condenser
  • Frequency Response: 20 to 20,000 Hz
  • Polar Pattern: Cardioid
  • Output Impedance: 150 ohms
  • Sensitivity (at 1kHz, open circuit voltage): −56 dBV/Pa (1.6 mV)
  • Maximum SPL (1 kHz at 1% THD, 1k ohms load): 155 SPL dB
  • Equivalent Output Noise (A-weighted): 31 dB SPL (typical)
  • Dynamic Range (at 1 kHz, 1 k ohms load): 124 dB, 132 dB
  • Clipping Level (1 kHz at 0.25% THD, 1k ohms load): 3 dBV (1.4 V)
  • Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 63 dB
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
  • Power Requirements: 11 to 52 Vdc phantom (1.2 mA)
0 stars based on 0 reviews