Shure AD4D-DC=-A Two-Channel Wireless Receiver

$3,265.00 $2,865.00
Article number: AD4D-DC=-A
Availability: Ships from manufacturer

The AD4D Axient Digital Dual Receiver sets a new standard in transparent digital audio and maximum spectral efficiency. Groundbreaking performance features

include wide tuning, low latency, and High Density (HD) mode, ensuring solid performance in the most challenging RF environments. Networked control, AES3 +

AES67 + Dante™ and signal routing options bring a new level of management and flexibility to your entire workflow. Compatible with all Axient Digital transmitters.

Features

  • DC Power Module supports backup power sources and remote operation
  • Wide tuning range up to 184MHz
  • True digital diversity reception per channel for drop-out resistance
  • Networked control with Wireless Workbench® and ShurePlus™ Channels app
  • Front panel headphone jack enables Dante Cue and Dante Browse monitoring
  • Configurable Ethernet switch for redundant Dante digital output
  • AES3 output
  • Channel Quality meter displays RF signal-to-noise
  • Locking AC connectors

Specifications

  • Dimensions 44 mm × 483 mm × 333 mm (1.7 in. × 19.0 in. × 13.1 in.), H × W × D
  • Weight 4.6 kg (10.1 lbs), without antennas
  • Housing Steel; Extruded aluminum
  • Power Requirements 100 to 240 V AC, 50–60 Hz; 0.26 A max.
  • Thermal Dissipation Maximum: 23 W (78 BTU/hr)
  • Idle: 15 W (52 BTU/hr)
  • DC Input Voltage Range 10.9–14.8 V DC
  • Maxiumum DC Input Current AD4D: 3.3 A
  • Protection Modes Overvoltage, Undervoltage, Reverse Polarity
  • 4-Pin XLR Pin 1: Negative; Pin 2: No Connection; Pin 3: No Connection; Pin 4: Positive
  • Audio Output
  • Gain Adjustment Range –18 to +42 dB in 1 dB steps (plus Mute setting)
  • Configuration 1/4" (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground)
  • XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -)
  • Impedance; Typical, XLR Line out: 100Ω
  • Full Scale Output: 200 kΩ load; 1/4" (6.35 mm): +8 dBV
  • XLR: LINE setting= +18 dBV, MIC setting= –12 dBV
  • Mic/Line Switch: 30 dB pad
  • Phantom Power Protection: Yes
  • Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
  • Network Addressing Capability: DHCP or Manual IP address
  • Maximum Ethernet Cable Length: 100 m (328 ft)
  • Cascade output Connector Type: BNC
  • Note: For connection of one additional receiver in the same band
  • Configuration Unbalanced, passive
  • Impedance: 50 Ω
  • Insertion Loss: 0 dB, typical
  • RF: Input
  • Spurious Rejection >80 dB, typical
  • Connector Type BNC
  • Impedance: 50 Ω
  • Bias Voltage 12–13.5 V DC, 150 mA maximum, per antenna, switchable on/off
  • RF Carrier Frequency Range


WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.

0 stars based on 0 reviews
By using our website, you agree to the use of cookies. These cookies help us understand how customers arrive at and use our site and help us make improvements. Hide this message More on cookies »